View AZ10100EL16VOLG_3771603.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.azmicrotek.com 1630 s stapley dr, suite 127 +1 - 480- 962- 5881 mesa, az 85204 usa requ est a sample may 2012, rev 2.0 d escription the az 100el16vo is an oscillator gain stage with a high gain output buffer including an enable. the q hg / q hg outputs have a voltage gain several times greater than the q/ q outputs. an enable input ( en ) allows continuous oscillator operation. the enable can be controlled by ecl or cmos signals b lock d iagram f eatures ? 3v to 5.5v power supply ? high voltage gain vs. standard el16 ? 75k ? enable pull - down resistor ? high bandwidth for 1ghz ? - 147 dbc/hz typical noise floor a pplications ? crystal or saw oscillators p ackage a vailability ? mlp8 ? mlp16 ? msop8 ? msop10 ? green/rohs compliant/pb - free az 100el16vo lvpecl oscillator gain stage & buffer with enable order number package marking az100el16vong 1 mlp8 p0g 2 az100el16vonbg 1 mlp8 p4g 2 az10/100el16volg 1 mlp16 azmg16j 2 az100el16vot+ 1 msop8 hvo+ 2 az100el16vou+ 1 msop10 azh+ 16vou 2 1 tape & reel - add 'r1' at end of order number for 7in (1k parts), 'r2' (2.5k) for 13in 2 see www.azmicrotek.com for date code format www.azmicrotek.com
arizona microtek, inc. az100el16vo lvpecl oscillator gain stage & buffer with enable www.azmicrotek.com +1 - 480- 962- 5881 2 request a sample may 2012, rev 2.0 p in d escription and c onfiguration table 1 - pin d escription for mlp8 package pin name type function 1 q output inverting pecl output 2 d input data input 3 v bb output reference voltage 4 en input output enable 5 v ee power negative supply 6 q hg output high gain inverting pecl output 7 q hg output high gain pecl output 8 v cc power positive supply table 2 - pin d escription for mlp8 package pin name type function 1 d input data input 2 v bb output reference voltage 3 en input output enable 4 v ee power negative supply 5 q hg output high gain inverting pecl output 6 q hg output high gain pecl output 7 v cc power positive supply 8 q output inverting pecl output table 3 - pin d escription for msop 8 package pin name type function 1 q output inverting pecl output 2 d input data input 3 v bb output reference voltage 4 en input output enable 5 v ee power negative supply 6 q hg output high gain inverting pecl output 7 q hg output high gain pecl output 8 v cc power positive supply v bb d 4 3 2 1 6 5 8 7 q hg q hg q v cc leave pad open or connect to v ee en v ee figure 1 ? pin configuration for az100el16von (mlp8) d 4 3 2 1 6 5 8 7 q hg q hg q v bb v cc leave pad open or connect to v ee en v ee figure 2 ? pin configuration for az100el16vonb (mlp8) 4 3 2 1 8 5 6 7 d q v bb en q hg q hg v cc v ee figure 3 ? pin configuration for az100el100vot (msop8)
arizona microtek, inc. az100el16vo lvpecl oscillator gain stage & buffer with enable www.azmicrotek.com +1 - 480- 962- 5881 3 request a sample may 2012, rev 2.0 table 4 - pin d escription for msop10 package pin name type function 1 q output pecl output 2 q output inverting pecl output 3 d input data input 4 d input inverting data input 5 v bb output reference voltage 6 en input output enable 7 v ee power negative supply 8 q hg output high gain inverting pecl output 9 q hg output high gain pecl output 10 v cc power positive supply table 5 - pin d escription for mlp 16 package pin name type function 1 nc 2 d input data input 3 d input inverting data input 4 v bb output reference voltage 5 en input output enable 6 nc 7 v ee power negative supply 8 10k input 10k enable 9 nc 10 q hg output high gain inverting pecl output 11 q hg output high gain pecl output 12 nc 13 v cc power positive supply 14 nc 15 q output pecl output 16 q output inverting pecl output 4 3 2 1 d 8 5 6 7 en v cc q hg v ee 9 10 v bb q q d q hg figure 4 - pin configuration for az100el16vou (msop10) d 4 3 2 1 5 8 7 6 10 9 12 11 q nc 13 14 15 16 nc nc q hg q hg d v bb v ee 10k v cc q leave pad open or connect to v ee nc nc en figure 5 - pin configuration for az100el16vol (mlp16)
arizona microtek, inc. az100el16vo lvpecl oscillator gain stage & buffer with enable www.azmicrotek.com +1 - 480- 962- 5881 4 request a sample may 2012, rev 2.0 e ng ineering n otes the az100 el16vo provides an active low enable ( en ) which can be driven with an ecl/pecl signal or a cmos logic signal. when en is low or floating (nc), input data is passed to both sets of outputs. when en is high, the q hg / q hg outputs will be forced low/high respectively, while input data will continue to be passed to the q/ q outputs. the az10 0 el16vo also provides a v bb output that supports 1.5ma sink/source current. when used, the v bb pin should be bypassed to ground or v cc via a 0.01 f capacitor. any used output must have an external pull down resistor. for 3.3v operation, an 180? resistor to v ee is recommended if an ac coupled load is present. at 5.0v, a 330? resistor is recommended for the ac load case. alternately, a 50? load terminated to v cc - 2v or the thevenin equivalent may be driven directly. unused outputs may be left floating (nc). 10k temperature compensation is offered on the az 100lvel16vol . if this mode is desired, connect the 10k pin to v ee . the connection must be less than 1 ? . note: specifications in ecl/pecl tables are valid when thermal equilibrium is established. q q d q hg q hg en figure 6 - az100el16vo timing diagram
arizona microtek, inc. az100el16vo lvpecl oscillator gain stage & buffer with enable www.azmicrotek.com +1 - 480- 962- 5881 5 request a sample may 2012, rev 2.0 d d v bb r1 see table r2 470 c2 3.3 or 5 v cmos el16vo front end c1 0.01 f ac coupling capacitor figure 7 ? application circuit for cmos inputs recommended component values for cmos single ended inputs input type r 1 1 value ac coupled (c2 in circuit) dc coupled (c2 shorted) 3.3 v cmos 430 750 5.0 v cmos 910 1.8 k 1. r1 should be chosen so that the input swing on the d input with respect to d is in the range of 80 to 1000 mv, per the ac characteristics table and the d input is < 750 mv with respect to v bb .
arizona microtek, inc. az100el16vo lvpecl oscillator gain stage & buffer with enable www.azmicrotek.com +1 - 480- 962- 5881 6 request a sample may 2012, rev 2.0 figure 8 - s11, 50 ? load to v cc - 2v figure 9 - s1 2 , 50 ? load to v cc - 2v
arizona microtek, inc. az100el16vo lvpecl oscillator gain stage & buffer with enable www.azmicrotek.com +1 - 480- 962- 5881 7 request a sample may 2012, rev 2.0 figure 10 ? s 2 1, 50 ? load to v cc - 2v figure 11 - s 22 , 50 ? load to v cc - 2v
arizona microtek, inc. az100el16vo lvpecl oscillator gain stage & buffer with enable www.azmicrotek.com +1 - 480- 962- 5881 8 request a sample may 2012, rev 2.0 p erformance data table 6 ? absolute maximum ratings absolute maximum ratings are those values beyond which device life may be impaired. symbol characteristic c ondition rating unit v cc pecl power supply v ee = 0v 0 to + 6.0 v v i_pecl pecl input voltage v ee = 0v 0 to + 6.0 v i out output current continuous 50 ma surge 100 t a operating temperature range - - 40 to +85 c t stg storage temperature range - - 65 to +150 c esd hbm human body model electro static discharge - 2500 v esd m m machine model electro static discharge - 200 v esd cd m charged device model electro static discharge - 2000 v table 7 - 100k ecl dc characteristics 100 k ecl dc characteristics (v ee = - 3.0 v to - 5.5v, v cc = gnd) symbol characteristic - 40 c 0 c 25 c 85 c unit min max min max min max min max v oh output high voltage 1 - 1085 - 880 - 1025 - 880 - 1025 - 880 - 1025 - 880 mv v ol output low voltage 1 - 1900 - 1555 - 1900 - 1620 - 1900 - 1620 - 1900 - 1620 mv v bb reference voltage - 1390 - 1250 - 1390 - 1250 - 1390 - 1250 - 1390 - 1250 mv v ih input high voltage d/ d - 1165 - 390 - 1165 - 390 - 1165 - 390 - 1165 - 390 mv input high voltage en - 1165 v cc - 1165 v cc - 1165 v cc - 1165 v cc mv v il input low voltage d/ d - 2250 - 1475 - 2250 - 1475 - 2250 - 1475 - 2250 - 1475 mv input low voltage en v ee - 1475 v ee - 1475 v ee - 1475 v ee - 1475 mv i ih input high current d/ d 60 60 60 60 a input high current en 150 150 150 150 a i il input low current d/ d 0.5 0.5 0.5 0.5 a i ee power supply current 40 40 40 46 ma 1. specified with each output terminated through 50 ? resistors to v cc - 2v.
arizona microtek, inc. az100el16vo lvpecl oscillator gain stage & buffer with enable www.azmicrotek.com +1 - 480- 962- 5881 9 request a sample may 2012, rev 2.0 table 8 - 100k lvpecl dc characteristics 100k lv p ecl dc characteristics (vee = gnd, vcc = +3.3v) symbol characteristic - 40 c 0 c 25 c 85 c unit min max min max min max min max v oh output high voltage 1 ,2 2215 2420 2275 2420 2275 2420 2275 2420 mv v ol output low voltage 1,2 1400 1745 1400 1680 1400 1680 1400 1680 mv v bb reference voltage 1 1910 2050 1910 2050 1910 2050 1910 2050 mv v ih input high voltage d/ d 1 2135 2910 2135 2910 2135 2910 2135 2910 mv input high voltage en 2135 1 v cc 2135 1 v cc 2135 1 v cc 2135 1 v cc mv v il input low voltage d/ d 1 1050 1825 1050 1825 1050 1825 1050 1825 mv input low voltage en v ee 1825 1 v ee 1825 1 v ee 1825 1 v ee 1825 1 mv i ih input high current d/ d 60 60 60 60 a input high current en 150 150 150 150 a i il input low current d/ d 0.5 0.5 0.5 0.5 a input low current en 3 - 300 - 300 - 300 - 300 a i ee power supply current 40 40 40 46 ma 1. for supply voltages other that 3.3v, use the ecl table values and add supply voltage value. 2. specified with each output terminated through 50 ? resistors to v cc - 2v. 3. specified with en forced to v ee . table 9 - 100k pecl dc characteristics 100k p ecl dc characteristics (vee = gnd, vcc = + 5.0v) symbol characteristic - 40 c 0 c 25 c 85 c unit min max min max min max min max v oh output high voltage 1,2 3915 4120 3975 4120 3975 4120 3975 4120 mv v ol output low voltage 1 ,2 3100 3445 3100 3380 3100 3380 3100 3380 mv v bb reference voltage 1 3610 3750 3610 3750 3610 3750 3610 3750 mv v ih input high voltage d/ d 1 3835 4610 3835 4610 3835 4610 3835 4610 mv input high voltage en 3835 1 v cc 3835 1 v cc 3835 1 v cc 3835 1 v cc mv v il input low voltage d/ d 1 2270 3525 2270 3525 2270 3525 2270 3525 mv input low voltage en v ee 3525 1 v ee 3525 1 v ee 3525 1 v ee 3525 1 mv i ih input high current d/ d 60 60 60 60 a input high current en 150 150 150 150 a i il input low current d/ d 0.5 0.5 0.5 0.5 a input low current en 3 - 1400 - 1400 - 1400 - 1400 a i ee power supply current 40 40 40 46 ma 1. for supply voltages other that 3.3v, use the ecl table values and add supply voltage value. 2. specified with each output terminated through 50 ? resistors to v cc - 2v. 3. specified with en forced to v ee .
arizona microtek, inc. az100el16vo lvpecl oscillator gain stage & buffer with enable www.azmicrotek.com +1 - 480- 962- 5881 10 request a sample may 2012, rev 2.0 table 10 - 10k ecl dc characteristics 10 k ecl dc characteristics (v ee = - 3.0 v to - 5.5v, v cc = gnd) symbol characteristic - 40 c 0 c 25 c 85 c unit min max min max min max min max v oh output high voltage 1 - 1080 - 890 - 1020 - 840 - 980 - 810 - 910 - 720 mv v ol output low voltage 1 - 1950 - 1650 - 1950 - 1630 - 1950 - 1630 - 1950 - 1595 mv v bb reference voltage - 1430 - 1300 - 1380 - 1260 - 1360 - 1240 - 1310 - 1190 mv v ih input high voltage d/ d - 1230 - 430 - 1170 - 380 - 1130 - 360 - 1060 - 310 mv input high voltage en - 1230 v cc - 1170 v cc - 1130 v cc - 1060 v cc mv v il input low voltage d/ d - 2300 - 1500 - 2260 - 1480 - 2240 - 1480 - 2190 - 1445 mv input low voltage en v ee - 1500 v ee - 1480 v ee - 1480 v ee - 1445 mv i ih input high current d/ d 60 60 60 60 a input high current en 150 150 150 150 a i il input low current d/ d 0.5 0.5 0.5 0.5 a i ee power supply current 40 40 40 40 ma 1. specified with each output terminated through 50 ? resistors to v cc - 2v. table 11 - 10k lvecl dc characteristics 1 0k lv p ecl dc characteristics (vee = gnd, vcc = +3.3v) symbol characteristic - 40 c 0 c 25 c 85 c unit min max min max min max min max v oh output high voltage 1,2 2220 2410 2280 2460 2320 2490 2390 2580 mv v ol output low voltage 1,2 1350 1650 1350 1670 1350 1670 1350 1705 mv v bb reference voltage 1 1870 2000 1920 2040 1940 2060 1990 2110 mv v ih input high voltage d/ d 1 2070 2870 2130 2920 2170 2940 2240 2990 mv input high voltage en 2070 1 v cc 2130 1 v cc 2170 1 v cc 2240 1 v cc mv v il input low voltage d/ d 1 1000 1800 1040 1820 1060 1820 1110 1855 mv input low voltage en v ee 1800 1 v ee 1820 1 v ee 1820 1 v ee 1825 1 mv i ih input high current d/ d 60 60 60 60 a input high current en 150 150 150 150 a i il input low current d/ d 0.5 0.5 0.5 0.5 a input low current en 3 - 300 - 300 - 300 - 300 a i ee power supply current 40 40 40 46 ma 1. for supply voltages other that 3.3v, use the ecl table values and add supply voltage value. 2. specified with each output terminated through 50 ? resistors to v cc - 2v. 3. specified with en forced to v ee .
arizona microtek, inc. az100el16vo lvpecl oscillator gain stage & buffer with enable www.azmicrotek.com +1 - 480- 962- 5881 11 request a sample may 2012, rev 2.0 table 12 - 10 pecl dc characteristics 10k p ecl dc characteristics (vee = gnd, vcc = + 5.0v) symbol characteristic - 40 c 0 c 25 c 85 c unit min max min max min max min max v oh output high voltage 1,2 3920 4110 3980 4160 4020 4190 4090 4280 mv v ol output low voltage 1,2 3050 3350 3050 3370 3050 3370 3050 3405 mv v bb reference voltage 1 3570 3700 3620 3740 3640 3760 3690 3810 mv v ih input high voltage d/ d 1 3770 4570 3830 4620 3870 4640 3940 4690 mv input high voltage en 3770 1 v cc 3830 1 v cc 3870 1 v cc 3940 1 v cc mv v il input low voltage d/ d 1 2700 3500 2740 3520 2760 3520 2810 3555 mv input low voltage en v ee 3500 1 v ee 3520 1 v ee 3520 1 v ee 3555 1 mv i ih input high current d/ d 60 60 60 60 a input high current en 150 150 150 150 a i il input low current d/ d 0.5 0.5 0.5 0.5 a input low current en 3 - 1400 - 1400 - 1400 - 1400 a i ee power supply current 40 40 40 46 ma 1. for supply voltages other that 3.3v, use the ecl table values and add supply voltage value. 2. specified with each output terminated through 50 ? resistors to v cc - 2v. 3. specified with en forced to v ee . table 13 - ac characteristics ac characteristics (v ee = - 3.0v to - 5.5v; v cc =gnd or v ee =gnd; v cc = +3.0v to +5.5v) symbol characteristic - 40 c 0 c 25 c 85 c unit min typ max min typ max min typ max min typ max t plh /t phl propagation delay d to q / q 1 100 300 100 300 100 200 300 100 300 ps d to q hg / q hg 2 150 450 150 450 150 290 450 150 450 ps t skew duty cycle skew 3 5 20 5 20 5 20 5 20 ps vpp (ac) input swing 4 differential 80 1000 80 1000 80 1000 80 1000 mv single ended 150 2000 150 2000 150 2000 150 2000 mv t r /t f output rise/fall 1,2 (20% - 80%) 80 240 80 240 80 135 240 80 240 ps 1. duty cycle skew is the difference between a t plh and t phl propagation delay through a device. 2. v pp is the peak - to - peak differential input swing for which ac parameters are guarantee d. the device has a voltage gain of 20 to q/ q outputs and a voltage gain of 100 to q hg / q hg outputs.
arizona microtek, inc. az100el16vo lvpecl oscillator gain stage & buffer with enable www.azmicrotek.com +1 - 480- 962- 5881 12 request a sample may 2012, rev 2.0 p ackage d iagram mlp8 green/rohs compliant/pb - free msl=1
arizona microtek, inc. az100el16vo lvpecl oscillator gain stage & buffer with enable www.azmicrotek.com +1 - 480- 962- 5881 13 request a sample may 2012, rev 2.0 p ackage d iagram mlp16 green/rohs compliant/pb - free msl=1
arizona microtek, inc. az100el16vo lvpecl oscillator gain stage & buffer with enable www.azmicrotek.com +1 - 480- 962- 5881 14 request a sample may 2012, rev 2.0 p ackage d iagram msop8 green/rohs compliant/pb - free msl=1
arizona microtek, inc. az100el16vo lvpecl oscillator gain stage & buffer with enable www.azmicrotek.com +1 - 480- 962- 5881 15 request a sample may 2012, rev 2.0 p ackage d iagram msop10 green/rohs compliant/pb - free msl=1 arizona microtek, inc. reserves the right to change circuitry and specifications at any time without prior notice. arizona microtek, inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does arizona microtek, inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. arizona microtek, inc. does not convey any license rights nor the rights of others. arizona microtek, inc. products are not designed, intended or authorized for use as components in system s intended to support or sustain life, or for any other application in which the failure of the arizona microtek, inc. product could create a situation where personal injury or death may occur. should buyer purchase or use arizona microtek, inc. products for any such unintended or unauthorized application, buyer shall indemnify and hold arizona microtek, inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable att orney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that arizona microtek, inc. was negligent regarding the design or manufacture of the pa rt.

▲Up To Search▲

Price & Availability of AZ10100EL16VOLG

	To Download AZ10100EL16VOLG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .